TEKNOLOGI PROSES PEMBUATAN ALAT PENGUPAS KULIT KACANG MERAH DENGAN DUAL ROLL PENGUPAS KAPASITAS 100 KG/JAM

  • Fajar Kerehen Yusuf Ginting ITM MEDAN
  • Mahyunis Mahyunis itm
  • Batu Mahadi Universitas Negeri Medan

Abstract

Red bean skin peeler machine with a capacity of 100 kg / hour using dual roll peeler is a tool to facilitate the public to increase the productivity of red beans and quality which has a main component consisting of frame, peeler roll, inlet, outlet and motor drive. While the supporting components are reducer, fan, bearing, pully, belt, chain, and main shaft. The types of machine tools used are lathes, cutting grinding machines, hand grinding machines, welding machines, drilling machines, sawing machines, milling machines and cylindrical grinding machines. Some things that need to be considered from the manufacture of red bean peeling machines are identifying materials and models, choosing machine tools, planning work steps, analyzing the processing time and making a schedule for making red bean skin peeling machines. From the results of the analysis of the calculation of the work that can be analyzed perole the total time of making components is 23.58 hours.

##submission.citations##

Howward, Machine Design , Mc.Graw. Singapure, 1998.

James M. Gere dan Stephen P .Timosenko. 2000. Mekanika Bahan, Jilid 1 Edisi Ke Empat. Jakarta: Erlangga.

Mulyoto P 2002. Mesin-mesin pertanian. Jakarta: PT. Graha persada.

Rizaldi T. 2006. Mesin Peralatan Departemen Teknologi Pertanian. Medan: Universitas Sumatera Utara.

Shigley Joseph E, Larry D Grandhi Harahap, Perencanaan Elemen Mesin, Jilid II, Edisi 4, Jakarta 1994.

Sugiarto, Sato Takesi, Gambar Mesin, PT. Paradya Paramita, Jakarta,1996

Sularso dan Suga, Kiyokatsu. (1991). Dasar Perencanaan dan Pemilihan Elemen Mesin. Jakarta: Erlangga

Sirait Faisal, Mahadi Batu. 2015. Teknologi Fabrikasi Mesin Pengupas Kulit Kacang Merah Kapasitas 50 Kg/Jam Menggunakan Kipas Pemisah. Tidak dipublikasikan. Medan: Institut Teknologi Medan.

Taufiq Rochim, Data Material, Kecepatan Potong, Sudut Mata Bor HSS,1993.

Umar Sukrisno. 1984. Bagian-bagian Mesin dan Merencana. Jakarta: Erlangga.

Published
2017-11-05